.: DMX Problems :.

Most DMX problems can be put down to incorrect DMX addressing or dmx input / output cables configured incorrectly.

Never use more than 32 Dmx drivers on a single dmx feed.

If more than 32 drivers are to be used per stream a DMX buffer will be required.

* Nothing working.

Check the controller for power and make sure there is a program running etc.

Check that the drivers are powered up and have a lit display.

If there is NO fast flickering led on the driver this means that a DMX signal is not being received. ( Please check dmx cables for proper input / output configuration).

*Random flickering

If a group of lights are flickering randomly it means that the term plug on the LAST driver has not been set.

If only some of a group of lights are flickering randomly it would indicate that there is a problem with a DMX cable ( at the first flickering unit) or that the term plug has been set somewhere other than the LAST dmx driver.

Back

For phone Assistance please call + 353 (0)46 9052219 /+353 (0) 87 0567562

Email support@variolighting.com